EasyManua.ls Logo

Avery Dennison AP7.t - Operating Modes

Avery Dennison AP7.t
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12/08 Rev. 5.01-01 USER MANUAL Commissioning & Operation
AP7.t
10
P For more detailed descriptions of the button functions, please see
Offline operation
on page 13 and
Online operation
on page 14
in “Info-Printouts and Parameters”.
Operating modes
Offline mode Printer settings can be made when the device is offline. The offline mode is
normally active when the printer is switched on. Print jobs are received via
the selected interface but not processed.
To configure the printer so that it goes directly into online mode when
switched on, set the parameter
SYSTEM PARAMETER > Active Mode to “Online”.
Online mode In online mode, print jobs are received and processed immediately. Possible
messages:
¯ To stop printing, press the online button.
Message mode The printer uses status reports to signal an error or a particular operating
status. This message mode indicates that the printer is waiting to quit or for
fault clearance. When quitting, the printer switches from message mode to
offline mode (depending on the error and the progress of the last active
process).
OFFLINE 0 JOBS No jobs are waiting to be processed.
ONLINE 0 JOBS No jobs are waiting to be processed.
ONLINE 0: JOBS The current data transfer to the printer is shown on
the display. This is indicated by the dot on the bottom
right next to the number of loaded jobs.
Another point on half line height above the first
shows the interpreter status:
No point: No data to interpete.
Solid point: The interpreter is busy (still data left
in the spooler).
Flashing point: The interpreter is waiting for data
required to complete a command (no data in the
spooler).
ONLINE 13 JOBS
Restcount: 25
During printing, the display also shows the number
of print jobs read (13) and the remaining number of
labels (25) to be printed in the current job.
ONLINE 13 JOBS
Restcount: endless
If a print job recognises an endless number of labels
to be printed, then the remaining number for this job
is also shown as endless.
Status 5001
No gap found
Messages are made up of the status number and a
brief descriptive text.

Other manuals for Avery Dennison AP7.t

Related product manuals