12/08 Rev. 5.01-01 USER MANUAL Commissioning & Operation
AP7.t
5
[3] Articles supplied with the AP 7.t
• AP7.t printer
• Documentation CD [3A]
Contains extensive instructions on using the printer as well as the Windows
driver and service manual.
• Label printing layout program “NiceLabel” [3B]
• Quick reference guide [3C]
Brief multilingual operating instructions (printed).
• Core adapters [3D]
There are two core adapters each for the material rolls, with internal
diameters of 76.2mm (3") and 101.4mm (4"). On delivery, the core adapters
are placed on the printer’s material dispenser.
• Print roller, long [3E] for label material widths exceeding 50.8mm.
• Power cable[3F]
The plug for the power supply may vary depending on the country of delivery.
• Data cable [3G]
Centronics IEEE 1284 CA cable 2m. The printer is connected with a type C
connector (compact design)!
• Ribbon sample [3H]
• Cardboard take-up roll [3I]
Empty take-up roll for rewinding the thermal transfer ribbon. On delivery, the
take-up roll is placed on the ribbon rewinding mandrel.
A
C
D
E
B
F
G
H
I
To Next Page
Loading...
