What to do if my Avery Dennison Label Maker doesn't print properly?
If your Avery Dennison Label Maker isn't printing, leaves voids, or prints too lightly, ensure the printer is powered on and properly loaded with supplies. Cleaning the printhead may also resolve the issue.
How to restart Avery Dennison Monarch Freshmarx 9417+ if the screen is off?
If the screen is off or the Avery Dennison Label Maker is unresponsive, press the Power Button to turn the printer off, then press it again to turn it back on. If it still won't turn off, unplug it from the outlet, wait 10 seconds, and plug it back in.
General| Print Resolution | 203 dpi |
|---|---|
| Maximum Print Width | 4.25 inches |
| Print Speed | 6 inches per second |
| Memory | 256 MB RAM, 512 MB Flash |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Connectivity | USB, Ethernet, Serial |
| Power | 100-240V AC, 50/60Hz |
| Supported Media Types | Labels, Tags |
| Technology | Direct Thermal and Thermal Transfer |
| Maximum Print Length | 39 in (990 mm) |
| Print Technology | Direct Thermal and Thermal Transfer |
To Next Page
