Avery Dennison Monarch Freshmarx 9417+ - LOADING LABELS; Loading the Left Printer

Introduction 1-1
INTRODUCTION
Use the Avery Dennison® Monarch® FreshMarx® 9417+ solution for product freshness
and to label inventory.
You may have a custom application that differs slightly from the examples in this manual. The
screens and labels shown are for reference only of the dual printer.
This revision of the manual is for FreshMarx application version 3.1 and higher. Version 3.1
includes secure file transfer protocol and in-application Wireless setup.
Audience
This manual is for the System Administrator who configures and updates the printer. For
information on using the EasyEdit+ Utility, refer to the EasyEdit+ System Administrator’s Guide.
For information on printing labels and the printer’s care and maintenance, refer to the
Operator’s Handbook.
About the Printer
The printer has a touch screen and a built-in FreshMarx application. The printer is available as
a single printer (left printer only) or dual printer (left and right printer).
The printer includes 21 standard formats. You can configure the dual printer to print one size
supply on the Left printer and a different size supply on the Right printer. If your dual printer
application only uses one size supply, you could configure the printer to print all formats on the
Left printer and use the Right printer as a backup.
The following table describes additional documentation for the 9417++ printer:
Item Description
Quick Reference Includes basic start-up information such as supply loading,
cleaning and minor troubleshooting.
Operator’s Handbook Includes information about using the printer’s application,
loading supplies, printing labels, and more.
EasyEdit+ System
Administrator’s Guide
Includes information about using the EasyEdit+ application to
create a product data file and select specific printer settings.
LNT Programmer’s
Manual
Includes information about designing a Language Neutral
Template (LNT) file.
1