Editing Product Data 4-9
Assigning a Label Format
You can select the label format for the category buttons. All products within a category must
use the same label format. You must be in Edit Mode to assign a label format to a category.
1. While in Edit Mode, select the category button to assign a format. If that category is not
active, press the category button again.
2. Select the Label Format for all products in this category. Use and to scroll through the
list of formats. See Appendix A, “Label Formats
” for more information.
If the selected format is larger than the loaded supply, some information may not print.
Note: If you want the operator to select which printer (Left or Right) to use when a product
button is pressed, assign all categories to the same format and the same printer (left or
right).
3. Press Save
To Next Page
Loading...
