Appendix B: Installing MTRX Expansion Cards 33
5 Align the PCIe connector on the card with the PCIe port mounted in the unit.
6 Making sure to guide the audio connectors through the open slot on the back of the unit, carefully push
the card towards the back of the unit until it seats fully into its PCIe connector.
7 Once the card is seated completely in its slot, secure it to the unit using a #1 Phillips screwdriver and the
fasteners you removed from the faceplate in step 1. Note that the fasteners are threaded into different
threaded holes than when they were securing the faceplate.
8 Proceed to “Completing the Installation” on page 40.
Side view showing card PCIe connector aligned with unit PCIe port
Pushing the card into its PCIe connector
Fasteners re-installed to secure the card into slot 1
To Next Page
Loading...
