Installation and Setup 14
To designate one Hybrid and one or more Meters tablets:
1 Add at least two S1s to My Surfaces.
2 Drag a Control app from All Surfaces and drop it on top of the same row as an S1. This Control app becomes a Hybrid.
3 Drag another Control app from All Surfaces and drop it on top of a row for a different S1 to designate it as a Meters app.
4 Repeat step 3 to add additional Control apps as Meters apps to other S1s, if any.
To unpair a Control app/tablet from an S1:
Select the S1 row in My Surfaces and click Remove.
To reassign tablets and S1s, do the following in the My Surfaces list:
To link a Control app to a different S1, drag the app onto the new S1.
To reassign a Hybrid or Meters tablet to be a Master, drag the Hybrid or Master app from the Linked Tablet column and drop it
onto an empty row
Guidelines
• If there are no other tablets in the My Surfaces list, dragging a tablet onto an S1 will always make that tablet a Hybrid.
• A Hybrid tablet’s Meters view follows banking on the S1 to which it is linked.
• If an S1 has a tablet linked in Hybrid mode, and a second tablet is added to the
My Surfaces list as a Master, the originally
linked Hybrid tablet becomes an S1 Meters tablet.
• If there are two S1 units (but no Dock) the first tablet dragged on top of an S1 becomes a Hybrid. Dragging another tablet onto
the other S1 adds that tablet as a Meters tablet, leaving the previously added tablet as a Hybrid.
Overview of the Surfaces Tab
The Surfaces tab in EuControl Settings shows all EUCON controllers on your network and those connected to your instance of Eu-
Control. Use the
Surfaces tab to add and connect surfaces, arrange them in the desired order, pair S1s with Control app tablets and
manage Control app Master/Meters/Hybrid designation.
Surfaces tab showing a linked S1 and Control app (Meters mode) and a second Control app (Master mode)
Surfaces tab showing the Avid Control app in All Surfaces (at left) and added to the My Surfaces list (at right)
To Next Page
Loading...
Need help?
General
