Chapter 2: Installing XMON 7
Chapter 2: Installing XMON
Installing and configuring the XMON EUCON Software application includes the following steps:
• Making audio connections
• Installing the M-Audio MIDI Uno
• Connecting the Control Cable Breakout Adaptor
• Connecting a Talkback microphone
Making Audio Connections
Monitoring is based on the XMON analog interface, which is remotely controlled from the XMON EUCON Software Application
and the MC Pro Control Room section. All supported audio inputs and outputs for control room monitoring and studio com-
munication are connected to the XMON interface.
All audio connections are made with standard DB-25 connectors.
XMON audio connections
Audio connections shown above are examples for Avid ICON work surfaces. Not all connections are supported with the XMON
EUCON Software Application.
XMON provides 18 V phantom power for the external Talkback Mic that connects via the DB-25 connector. The internal Talk-
back mic requires an external phantom power supply.
To Next Page
Loading...
Need help?
General
