Installation
Camera Package Contents
Depending on when you ordered the HD Multisensor Dome Camera, you may receive one of the following
packages. Ensure the package contains the camera and the expected accessories:
A. Avigilon HD Multisensor Dome Camera (12W-H3-4MH-DP1 and 9W-H3-3MH-DP1)
l H3-MH-NPTA1 kit:
o
1 ½” NPT locking nut
o
1 ½” female NPT adapter
l CAM-ACCS-H3PTZ kit :
o
T20 Torx key
o
Teflon Sealing Tape
o
RJ-45 crimp-on plug and weather-resistant housing
o
External Power wiring harness
o
External I/O wiring harness
B. Avigilon HD Multisensor Dome Camera (12W-H3-4MH-DP1-B and 9W-H3-3MH-DP1-B)
l PTZMH-MT-NPTA1 kit:
o
1 ½” male NPT adapter
l PTZMH-ACCS-CABL1 kit:
o
1 ½” NPT locking nut
o
T20 Torx key
o
Teflon Sealing Tape
o
RJ-45 crimp-on plug and weather-resistant housing
o
External Power wiring harness
o
External I/O wiring harness
If you will be installing the male NPT adapter (-B) version of the camera with the pendant wall mount (CM-MT-
WALL1), ensure the wall mount package contains the following:
l Pendant wall mount
l Mounting template sticker
l T20 Pin-In Torx driver
l 4 concrete anchors (#8-10)
l 4 screws (#8 x 1.25)
l RJ-45 grommet piercing cap
l Teflon sealing tape
Installation 5
To Next Page
Loading...
Need help?
General
