Avigilon 12W-H3-4MH-DP1 - Specifications

Specifications
Camera
Lens
12W-H3-4MH-DP1 and 12W-H3-4MH-DP1-B – 4 x 3MP 2.8-8mm, F1.3, P-iris
9W-H3-3MH-DP1 and 9W-H3-3MH-DP1-B – 3 x 3MP 2.8-8mm, F1.3, P-iris
Audio Input/Output Line level input and output
Onboard Storage SD/SDHC/SDXC slot – minimum class 4; class 6 or better recommended
Network
Network 100Base-TX
Cabling Type CAT5
Connector RJ-45
ONVIF ONVIF compliance version 1.02, 2.00, Profile S (www.onvif.org)
Security
Password protection, HTTPS encryption, digest authentication, WS authentication, user
access log
Streaming Protocols
IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP,
Zeroconf, ARP, LLDP, RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP,
RTP/RTSP/HTTP/TCP,RTP/ RTSP/HTTPS/TCP, HTTP
Mechanical
Dimensions
Ø x H
226mm x 299.77mm (8.9” x 11.8”)
Weight 3.9kg (8.6lbs)
Dome Bubble
12W-H3-4MH-DP1 and 9W-H3-3MH-DP1 — Polycarbonate, clear
12W-H3-4MH-DP1-B and 9W-H3-3MH-DP1-B — Nylon, clear
Body Aluminum
Housing Pendant mount
Finish
12W-H3-4MH-DP1 and 9W-H3-3MH-DP1 — Powder coat, cool gray 2
12W-H3-4MH-DP1-B and 9W-H3-3MH-DP1-B — Powder coat, RAL 9003
Tilt +10° to +67° (depending on position of each camera head)
Pan +/-12° to +/-30° (depending on position of each camera head)
Azimuth +/- 180°
Electrical
Power Consumption
26W with external power or IEEE 802.3at Type 2 PoE Plus
13W with IEEE 802.3af Class 3 power
Power Source
VDC: 24 V +/- 10%, 26W MIN.
VAC: 24 V +/- 10%, 37VA MIN.
PoE: IEEE 802.3af Class 3 or IEEE 802.3at Type 2
Specifications 23