Page 15
Joining a call already in progress from the Call Commander:
1. Scroll to the desired call then press the Select button, Hands-Free button, or lift the
handset to automatically join into the 3-way call.
2. Press the Disconnect External button to disconnect the external line.
3. Press the Disconnect Internal button to hang up the Call Box.
4. After disconnecting the internal call, use the scroll up or scroll down button to assign the call
as “Urgent” or “Not Urgent”, then press the Select button.
NOTE: It is recommended in an emergency situation to have high-trac areas assigned as
“Urgent”.
5. Use the scroll up and scroll down button to select the next desired call.
6. Repeat the steps above until all calls have been answered and the handset has been hung
up if utilized.
Call from Call Commander to Call Box:
1. Press the Directory button.
2. For a handset call, scroll to the required call box, lift handset, then press Select.
For a hands-free call, scroll to the required call box, and press Select with the handset on-
hook.
3. A handset call is ended by hanging up the handset.
A Hands-free call is ended by pressing the Disconnect Internal button.
4. Press the Directory button a second time to exit the directory list.
To Next Page
Loading...