User’s Manual
133
7. Starting a Scan from Your
Mobile Device
With a built-in Wi-Fi module, the scanner can be converted into
a wireless device. When a mobile device is use, the scanned
images can be received from the mobile device.
7.1 Making Preparation
To connect the scanner to a wireless LAN, prepare the
f
ollowings:
An environment in which a wireless LAN is available
When connecting the scanner to a wireless LAN, you may
need information for a wireless access point such as an SSID
(network name) and a security key (password). For details,
contact your Network Administrator or refer to the manual
for the wireless access point.
Attention!
Do not place obstacles that block radio waves (e.g. walls or
metal plates) or devices that cause radio wave interference
(e.g. cordless phones) within 100 mm of the scanner, or
near your wireless access point.
7
To Next Page
Loading...
