64
Mac OS
To load a profile (Mac)
1. Customize your settings. (For example, change your
resolution, image type, cropping method, scan size, or
other scan settings.)
2. Click the Image tab and click “+” on the Profile to enter
the name of the profile and then choose “OK”.
3. The new profile will be saved and shown in the “Profiles”
dropdown list box.
To load a profile,
1. From the Image tab dialog box, choose your favorable
profile from the “Profiles” dropdown list box.
2. Your favorable profile will be immediately loaded and
displayed on Scanner Properties dialog box.
To delete a profile,
1. Choose the profile you want to delete from the dropdown
list box.
2. Click “-”. A Confirm message “Are you sure you want to
delete this profile?” is prompted.
3. Choose “OK” to delete or “Cancel” to quit.
To Next Page
Loading...
