Event Log
FRITZ!Box – 4 Configuring FRITZ!Box 33
The ‘Port Forwarding’ Button
When FRITZ!Box is configured as a router (this is the default
setting), programs on your computer or LAN cannot be ac-
cessed from the Internet.
Click the “Port Forwarding” button to grant other parties from
the Internet restricted access to the computers connected to
FRITZ!Box by opening certain ports to incoming connections
Other parties then access your computer at the IP address
you were assigned by the Internet Service Provider. If a con-
nection is active, the IP address is displayed on the
“FRITZ!Box Overview” page and in the Event Log.
Event Log
Messages about the activities and conditions of the
FRITZ!Box Internet connection(s) are registered in the Event
Log. These messages are sent directly by FRITZ!Box and refer
only to the DSL line and events associated with FRITZ!Box’s
control of the Internet connection. Other actions, such as
how Internet connections are controlled by programs on the
connected computers, are displayed in the respective pro-
grams and not included here. See the Online Help of the user
interface for an overview of the messages.
DSL Information
For the technically interested user, this window presents an
overview of the most important data on the DSL connection.
The transmission speeds and the status of the DSL lines are
displayed graphically in the overview.
Below the graphic are displayed the transmission mode
used and the versions of the DSL software and the FRITZ!Box
firmware.
The display options for this side include information on
ADSL, ATM and the DSL spectrum.
FRITZ!Box-e.book Seite 33 Donnerstag, 8. Juli 2004 9:37 09
To Next Page
Loading...
Need help?
General
