AVM Fritz!Box User Manual

Uninstallation in Windows Me and 98
38 FRITZ!Box – 5 Removing FRITZ!Box
5.2 Uninstallation in Windows Me and 98
Note that FRITZ!Box must be connected to the computer’s
USB port when the USB driver is removed.
Proceed as follows to remove the USB driver of FRITZ!Box in
Windows Me/98:
1. Open “Start / Settings / Control Panel / System”.
2. Click on the “Device Manager” settings page.
3. In the “Network adapters” section, select the “AVM
FRITZ!Box” entry.
4. Then click the “Delete” button.
5. Confirm the uninstallation message by clicking “OK”.
6. Follow the instructions displayed on the screen. Keep
your Windows CD ready.
Rebooting the computer concludes the uninstallation.
5.3 Uninstallation in Windows 2000
Note that FRITZ!Box must be connected to the computer’s
USB port when the USB driver is removed.
Proceed as follows to remove the USB driver of FRITZ!Box in
Windows 2000:
1. Open “Start / Settings / Control Panel / System” and
select the “Device Manager” button on the “Hardware”
settings page.
2. In the “Network adapters” section of the Device Manag-
er, select the “AVM FRITZ!Box” entry.
3. In the “Action” menu, select the “Uninstall...” command.
4. Confirm the uninstallation in the following security
prompt. The FRITZ!Box will be removed.
This completes uninstallation of the driver software of
FRITZ!Box.
FRITZ!Box-e.book Seite 38 Donnerstag, 8. Juli 2004 9:37 09

AVM Fritz!Box Specifications

General

DSL Standard	VDSL2, ADSL2+
VoIP	Yes
DECT Base Station	Yes
Type	Modem/Router
Wireless Standard	Wi-Fi 6 (802.11ax)
Annex Types	Annex A, Annex B
USB Ports	2
Ethernet Ports	4
Ports	1 x DSL
Frequency Band	2.4 GHz, 5 GHz
Security	WPA3
Power Supply	External power adapter