Operation Requirements
FRITZ!Box – 1 This Is FRITZ!Box 9
1.2 Operation Requirements
In order to operate FRITZ!Box, you must have the following:
! one DSL Line: city network providers, Standard ITU
G.992.1 Annex B, T-Com 1TR112 (U-R2)
! If you want to connect FRITZ!Box over your computer’s
LAN interface, a computer with the following specifica-
tions is required:
– computer with LAN port (standard network adapter
Ethernet 10/100 Base-T), game console or other de-
vices that support a network
– To connect an additional computer with a network
cable, a computer with a network adapter and a net-
work cable are required.
– To connect additional computers or a network, you
also need an Ethernet hub or switch.
– FRITZ!Box also can be connected to a Linux or an
Apple computer via the LAN interface.
! If you want to connect FRITZ!Box over your computer’s
USB interface, a computer with the following specifica-
tions is required:
– computer with USB port (USB version1.1 or 2.0),
hard drive and CD drive
– Operating system: Microsoft Windows XP,
Windows Me, Windows 2000, Windows 98,
Mac OS X from Version 10.3.3 or SUSE Linux
from 9.0 upwards
! To install the FRITZ!DSL software package, the minimum
computer requirements are:
– 300 MHz Pentium II processor with Windows XP,
2000, Me or 98 and CD drive
– 32 MB RAM
– 20 MB free memory on the hard drive
FRITZ!Box-e.book Seite 9 Donnerstag, 8. Juli 2004 9:37 09
To Next Page
Loading...
