System Settings
FRITZ!Box – 4 Configuring FRITZ!Box 35
A message appears announcing that the update has
been successfully completed. During the update proce-
dure the “Info” LED flashes. It goes out when the up-
date has been completed. This process may take sever-
al minutes.
As soon as the update has been completed, FRITZ!Box is re-
started and immediately ready for operation.
Restoring Factory Settings
Click this button to restore the settings that were active when
FRITZ!Box was delivered. All settings made during operation
will be overwritten.
Restoring the factory settings means deleting all settings on
FRITZ!Box along with the access information for the Internet
connection. Use this function before allowing outside parties
to use FRITZ!Box.
Advanced Settings
In the “Advanced Settings” area, experienced users can
make settings for different system functions of FRITZ!Box, for
instance for the DHCP server and traffic shaping.
Do not make any changes in this area unless you are experi-
enced in working with network settings. Incorrect settings in
this area can lead to FRITZ!Box malfunctions and interfere
with access to FRITZ!Box.
When the DHCP server of FRITZ!Box is deactivated, every net-
work adapter connected to FRITZ!Box must be assigned a
fixed IP address.
FRITZ!Box-e.book Seite 35 Donnerstag, 8. Juli 2004 9:37 09
To Next Page
Loading...
Need help?
General
