26 AutoView 1415/1515/2015 Switch Installer/User Guide
To choose the default display order of servers:
1. Select Name to display servers alphabetically by name.
-or-
Select EID to display servers numerically by EID number.
-or-
Select Port to display servers numerically by port number.
2. Click OK.
To set up key sequences to launch the OSCAR interface:
1. Click the box next to the key sequence you want to start the OSCAR interface. Unchecking all
boxes will leave
Print Screen as the default.
2. Click OK.
To set a Screen Delay Time for the OSCAR interface:
1. Type in the number of seconds (0 to 9) to delay the OSCAR interface display after you press
Print
Screen
. Entering 0 will instantly launch the OSCAR interface with no delay.
2. Click OK.
Setting a Screen Delay Time allows you to complete a soft switch without the OSCAR interface
displaying. To perform a soft switch, see Soft switching in this chapter.
Setting the keyboard country code
The AutoView 1415/1515/2015 switch can be configured to recognize a variety of keyboards. The
default setting is for a US keyboard. If you wish to change this configuration, the Keyboard dialog
box allows you to select a different keyboard country code.
NOTE: Ensure that the country code selected on your Sun server matches the Keyboard Country Code selected
in the OSCAR interface or your keyboard will not be mapped correctly.
To Next Page
Loading...
Need help?
General