Chapter 3: Basic Operations 33
To turn off the screen saver:
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.
To immediately turn on the screen saver:
Press
Print Screen, then press Pause.
Displaying Version Information
The OSCAR interface enables you to display the versions of the AutoView switch, as well as the
AVRIQ module and IAC module firmware. For optimum performance, keep your firmware
current. For more information, see Appendix A.
To display version information:
1. Press
Print Screen. The Main dialog box will appear.
2. Click Commands
- Display Versions. The Version dialog box displays. The top half of the box
lists the subsystem versions in the appliance.
Figure 3.15: Version Dialog Box
3. Click the Target button to view individual AVRIQ and IAC module version information. The
Target Selection dialog box displays.
To Next Page
Loading...
Need help?
General