Chapter 3: Local Port Operation 35
Displaying version information
The OSCAR interface enables you to display the version number of the switch firmware and any
auxiliary devices connected to the switch. This information facilitates system troubleshooting and
support. For optimum performance, keep your firmware current.
To display version information:
1. If the OSCAR interface is not open, press
Print Screen to open the Main dialog box.
2. Click
Commands - Display Versions to open the Version dialog box shown in Figure 3.19.
Figure 3.19: OSCAR Interface Version Dialog Box
3. To view individual AVRIQ module version information, click AVRIQ to open the AVRIQ
Selection dialog box shown in Figure 3.20.
Figure 3.20: AVRIQ Selection Dialog Box
To Next Page
Loading...
