Preview (LOCAL)
In this tab, you can see a preview of the camera IP video output.
Figure 15: WebGUI > Preview
Next to the preview you see:
1. PTZ keys to move the lens of the camera and Focus keys (works only when the focus is set to manual). You can
adjust the PTZ speed (the speed when the camera moves) by using the bar below the PTZ keys.
2. • Click on the audio icon to activate the audio (Make sure to connect an audio cable to the balanced
audio input of the camera). Remember to enable the Audio Enable option in the Audio tab of the WebGUI.
• Stream icon to switch the main and sub stream. Click the icon to switch to the sub stream and click again to
turn back to the main stream.
• Click the Full icon to switch to full screen. Press ESC to turn back to WebGUI Preview.
3. On top: The main tabs to enter different pages of the WebGUI.
The Preview feature works ONLY if the main or sub stream is set to 'H264' (see VIDEO - Camera Settings).
Set, Call and delete presets
To set, call and delete presets do the following:
1. Set the camera in the desired position with the desired zoom and focus level.
2. Type the number of the preset under Preset and click on the SET icon.
3. To call a preset, select the number of that preset and click the RUN icon.
4. To delete a preset, select the preset number of that preset and click the CLEAR icon.
Presets stores the Pan and Tilt position, along with the zoom level (excluding exposure or white balance settings).
If manual focus is selected, the focus position is also stored. Be aware that upon camera restart, the lens will
automatically move to the position of preset 0 when you selected preset 0 before. Deleting preset 0 will ensure that
the camera starts with the lens facing forward.
Next to the preset icons there is also a "Home" icon (at the center of the PTZ buttons). If you click on that icon, the
camera will zoom out and moves to a position with the lens straight forward. The "Home" icon cannot be used as a
(normal) preset and affects, like the presets, only the Pan, Tilt and Zoom position of the camera.
25
To Next Page
Loading...
