Using the Remote Control
The Product is provided with an IR Remote Control for full control of the camera and use of the OSD menu.
Figure 50: Remote Control
The various options (a. through o.) are outlined below.
a. Power
1. Put two AAA 1.5v batteries in the IR Remote Control. Use ONLY this type of batteries! Using other type
of batteries can damage the IR Remote Control.
2. Press the Power button to turn on the camera. If the position preset '0' has been stored, this will be
called after initialization.
3. Press the Power button again to turn the camera off. The lens will turn backwards when turned off. This
is called the “privacy mode”.
b. Set
This button has no function with this camera.
49
To Next Page
Loading...
