Video Encoder Option Main Stream Sub Stream
RTSP Link rtsp://<ip-address>/live/av0 rtsp://<ip-address>/live/av1
RTP Package Small Package (standard MTU size, 1500 bytes), Big Package (approx. 60kb MTU size)
NDI uses the Main Stream of the camera. Execute the following steps to save your settings:
1. Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
2. Reboot the camera if you changed RTP package.
Read the article from Youtube and the article from Facebook for setting up a correct stream.
VIDEO - Streaming Video
Figure 18: WebGUI > VIDEO > Streaming Video
The recommended Streaming Video settings are listed below. See for more Streaming on the website.
Stream Option Main Stream Sub Stream
Enable Mark checkbox to enable Mark checkbox to enable
Protocol Type RTMP, SRT RTMP, SRT
Host Address 192.168.5.11 192.168.5.11
Host Port 1935 1935
Stream Name live/av0 live/av1
User Name Empty is default setting Empty is default setting
Password Empty is default setting Empty is default setting
Password for stream encryption* Empty is default setting Empty is default setting
Crypto Key Length in bytes 0, 16, 24, 32 0, 16, 24, 32
Execute the following steps to save your settings:
1. Mark the checkbox to enable and select RTMP or SRT as Protocol Type. You need an optional
license if you want to use SRT.
2. (* in the table ) Enter a value for Password for stream encryption if the selected Protocol Type is "SRT".
This is the Caller Mode. For the Listener Mode see Video - SRT.
3. Change the Host Address to the IP address of the camera.
4. Click SAVE to apply your settings. A small confirmation dialogue appears in the bottom right corner.
5. Start a video streaming application like VLC mediaplayer, Daum Potplayer etc.
6. At Media > Open Network stream >Network type rtmp//192.168.5.11/live/av0 or rtsp//192/168.5.11/
live/av0 (or live/av1 if you use the substream) and click Play.
33
To Next Page
Loading...
