Avonic CM93-IP-B - Page 72

Camera Control Commands
Command Function Command Packet Comments
Preset_H_Speed Horizontal (Pan) speed
between presets
81 01 03 01 qq FF qq= speed setting1 ~ 25 (1 = 00
HEX,
25 = 18 HEX)
Preset_V_Speed Vertical (Tilt) speed between
presets
81 01 03 02 qq FF qq = speed setting1 ~ 21 (1 = 00
HEX,
21 = 14 HEX)
Preset_Z_Speed Zoom speed between
presets
81 01 03 03 qq FF qq = speed setting1 ~ 8 (1 = 00 HEX,
8 = 07 HEX)
Blue_Tuning
(autowhitebalance active)
more or less blue while
maintaining auto white
balance active
81 0A 01 13 pp FF pp = setting
-10 ~ +10(00~14 HEX)
Red_Tuning
(autowhitebalance active)
more or less red while
maintaining auto white
balance active
81 0A 01 12 pp FF pp = setting
-10 ~ +10(00~14 HEX)
Camera Control Commands
Command Function Command Packet
Comments CM40/ CM70 Comments CM90 (HDMI)
pp: Video Format
00: 1080p60
01:1080p50
02: 1080i60
03: 1080i50
04: 720p60
05: 720p50
06: 1080p30
07: 1080p25
08: 720p30 08: -
09: 720p25 09: -
0A:1080p59.94 0A: 1080p59
0B: 1080i59.94 0B: 1080i59
0C: 720p59.94 0C: 720p59
0D:1080p29.97 0D: 1080p29
VideoSystem_Set
(CM40 series: It is possible to set the video
format, but since the video format is dictated
by the computer the camera is connected
with, the picture will NOT change to that
format.)
8x 01 06 35 00 pp FF
0E: 720p29.97
Additional Features (license needed)
Tracking Commands
Command Function Command Packet Comments
ON 8x 0A 01 32 00 00 02 00 FF Tracking enabledTracking
OFF 8x 0A 01 32 00 00 03 00 FF Tracking disabled
72