Avonic CM93-IP-B - Page 83

Video Encode Settings
Bit Rate (kb/s) http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoEncode":[{"stMaster":
{"dwMaxBitRate":200},"nChannel":0}]}}
dwMaxBitRate [64, 40960]
Frame Rate (F/S) http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoEncode":[{"stMaster":
{"nFrameRate":25},"nChannel":0}]}}
nFrameRate [5, 60]
Frame Interval http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoEncode":[{"stMaster":
{"nIFrameInterval":70},"nChannel":0}]}}
nIFrameInterval [1, 300]
Frame Min QP http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoEncode":[{"stMaster":
{"byIFrameMinQP":70},"nChannel":0}]}}
byIFrameMinQP [10, 51]
Stream Name http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"VideoEncode": [{"stMaster":
{"szStreamName":"live/av01"},"nChannel":0}]}}
szStreamName user-defined
Video Streaming
Stream Publish
Get stream publish parameters
Code http://192.168.5.126/ajaxcom?szCmd={"GetEnv":{"StreamPublish":{"nChannel":-1}}}
Set stream publish parameters
Code http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stSlave":
{"wHostPort":1935,"szHostUrl":"192.168.5.11", "nProtolType":2,szStreamName":"live/
av1","bEnable":0,"nAbProtolMask":1,"szSrtKey":"","wSrtKeyLen":0,"szUserName":"","szPassword":""},”stMaster”:
{"wHostPort":1935,"szHostUrl":"192.168.5.11",”nProtolType":3,"szStreamName":"live/av0","bEnable":0,
"nAbProtolMask":1,"szSrtKey":"1111111111","wSrtKeyLen":0,"szUserName":"","szPassword":""},"nChannel":0}]}}
NOTE: When modifying one param, you should take along wHostPort. Otherwise, the host port will be zero.
Function Code Command Setting
Enable http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":1935,"bEnable":1,"nProtolType":3},"nChannel":0}]}}
bEnable 0: off
1: on
Protol Type nProtolType 2: srt 3: rtmp
Host Address http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":1935,"nProtolType":3",szHostUrl": "192.168.5.12"},"nChannel":0}]}}
szHostUrl user-defined
Host Port http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3},"nChannel":0}]}}
wHostPort [0,65535]
Stream Name http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3,"szStreamName":"live/1213"},"nChannel":0}]}}
szStreamName user-defined
User Name http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3,"szUserName":"123"},"nChannel":0}]}}
szUserName user-defined
Password http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3,"szPassword":"123"},"nChannel":0}]}}
szPassword user-defined
SrtKey (SRT
Effectie)
http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3,"szSrtKey":"0123456789"},"nChannel":0}]}}
szSrtKey user-defined
SrtKeyLen
(SRTEffectie)
http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamPublish":[{"stMaster":
{"wHostPort":19355,"nProtolType":3,"wSrtKeyLen":"0"},"nChannel":0}]}}
wSrtKeyLen [0-32]
(RTP) Multicast Streaming
RTP Multicast
Get rtp multicast parameters
Code http://192.168.5.126/ajaxcom?szCmd={"GetEnv":{"StreamRTPMulticast":{"nChannel":-1}}}
Set rtp multicast parameters
Code http://192.168.5.126/ajaxcom?szCmd={"SetEnv":{"StreamRTPMulticast":[{"stSlave":
{"nProtolType":0,"bEnable":0,"wMultiCastPort":4002,"szMultiCastUrl":"224.1.2.3"},"stMaster":{"nProtolType":1,"bEnable":0,"wMultiCastPort":4000,
"szMultiCastUrl":"224.1.2.3"},"nChannel":0}]}}
NOTE: When modifying one param you should take along bEnable and awMultiCastPort. Otherwise, it will be set to 0. Suggesting that when setting env, you can
distinguish the stMaster and stSlave.
83