AVS Electronics ONE PA User Manual

- 1 -
IST0814V1.8
SISTEMA DI QUALITA’
CERTIFICATO
UNI EN ISO 9001:2008
Curtarolo (Padova) ITALY
www.avselectronics.com
OnE PA WS
Rivelatore via radio ad infrarossi passivi
da interno e esterno
E DT
OnE DT HP
Rivelatore ad infrarossi passivi e microonde
da interno e esterno
E PA
OnE PA HP
Rivelatore ad infrarossi passivi
da esterno e interno
E
N
G
F
R
A
I
T
A
E
S
P
N
L
D

AVS Electronics ONE PA Specifications

General

Detection Angle	110°
Category	PIR Motion Detector
Detection Range	12 meters
Alarm Output	NC
Tamper Output	NC
Operating Temperature	-10°C to +50°C

Summary

General Product Characteristics

Model Connections

Describes how models connect for signalling Alarm and Tamper contacts.

Configuration Methods

Explains configuration using DIP SWITCHES and XWIN software for different models.

Initial Power-On Procedure

Details the initial 60-second sensor blocking and self-regulation phase.

Dual Technology (AND) Operation

Explains how both IR and microwave signals must trigger an alarm simultaneously.

Anti-Masking Functions

Describes the sensor's response to obstacles covering the lens via time delay.

Infrared Anti-Masking Details

Details the IR anti-masking mechanism using active IR receiver/transmitter.

Microwave Anti-Masking Details

Explains the microwave anti-masking circuit for detecting reflective materials.

Lens Contamination Detection

Describes how the sensor detects a soiled lens and requires cleaning.

Sensor Coverage and Detection

Coverage Patterns

Details the detection range and angle for various sensor models.

Pet Immunity Feature

Filter Application Guide

Step-by-step guide on how to apply the adhesive filter for pet immunity.

Pet Immunity Coverage Zone

Illustrates the modified coverage zone with the pet immunity filter applied.

Installation and Mounting Guidance

Installation Examples

Provides visual examples for wall and bracket mounting configurations.

Basic Sensor Components

Sensor Base Parts

Identifies the parts of the basic sensor and its double bottom for assembly.

Mounting Accessories

Accessory Usage and Types

Lists and illustrates accessories for different mounting tilts and rain protection.

OnE PA / OnE DT Wiring and Settings

Terminal Block Connections

Details the terminal block for power, alarm, and tamper contacts.

SW1 Balancing Resistance Configuration

Table for configuring tamper and alarm balancing resistances via DIP switches.

SW2 Function Configuration

Table explaining the functions controlled by SW2 DIP switches.

OnE PA HP / OnE DT HP Wiring and Settings

Serial Connection Terminals

Describes terminal block for serial communication and power connections.

SW2 Function and LED Settings

Explains SW2 DIP functions for LED behavior and anti-masking.

SW2 Sensor Address Configuration

Table for setting sensor addresses using SW2 DIP switches.

Common Configuration Scenarios

Details common settings for LED indicators and microwave/anti-mask status.

Range Adjustment Trimmers

Instructions for adjusting microwave and infrared ranges using trimmers.

OnE WS Wireless Detector Configuration

Power, LED, and Consumption Modes

Details power supply, LED status, and reduced consumption settings.

SW1 Function Settings

Table for configuring sensitivity and tamper accelerometer via SW1 DIP.

SW1 Sensor Address Configuration

Table for setting sensor addresses using SW1 DIP switches.

Declaration of Conformity - ONE PA/ONE PA HP

Declaration of Conformity - ONE DT/ONE DT HP

Declaration of Conformity - ONE PA WS

R&TTE Directive Compliance Summary

Model Specific Compliance Data

Provides technical details and country usage for specific models.

Battery Replacement Safety

Important safety instructions regarding battery replacement and handling.

Comparative Technical Specifications