Axis 211M User Manual

AXIS 211M - Configuration
13
Configuration
This section describes how to configure the camera, and is intended for product Administrators and Operators.
For a description of user access rights, see
Security, on page 29.
The camera is configured from the Setup link in your standard browser.
The descriptions below show examples of the features available in the AXIS 211M. For details of each setting,
please refer to the online help available from the Setup link. Click
to access the online help.
To configure the camera
Follow the instructions below to configure the camera from a browser.
1. Start your browser and enter the IP address or host name of the camera in the location/address field.
2. The Live View page appears. Click the Setup link on the top right of your web browser.
AXIS Media Control
The AXIS Media Control (AMC) is automatically installed the first time the camera is accessed from Microsoft
Internet Explorer. The AMC control panel can be opened by right-clicking on the video image on the Live View
page. The control panel can be used to configure various video and audio settings.
For more information, see the AMC User’s Manual, available on the CD supplied with this product, or from
www.axis.com/techsup
Setup tools

Axis 211M Specifications

General

Maximum resolution	1280 x 1024 pixels
Camera shutter speed	1/15000 - 1/4 s
Minimum illumination	1 lx
Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/3 \
Focal length range	3 - 8 mm
Power source type	PoE
Power consumption (typical)	5 W
Processor model	ARTPEC-A
Flash memory	8 MB
Internal memory	64 MB
I/O ports	1x RJ-45
Dimensions (WxDxH)	44 x 88 x 172 mm
Power requirements	DC 7 - 20V
Resolution description	1.3MP
Supported network protocols	IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	244 g