Removing Gear From Bracket
Gear and its mount hold strong over the course of regular use. Gear should not come off on its
own if installed correctly. For this reason, once Gear is on its bracket, removal may seem
difficult at first. However, there is a specific way to do so without damaging Gear, the mount, or
the mounting material.
First, power off Gear and unplug it from the power source.
Grab hold of the bottom of Gear and pull the bottom of Gear slightly away from the bracket. A
cm or so will do. While still pulling the bottom away, lift Gear up and slide it off the mount. You
may hear several clicks as you do so. These clicks are Gear moving in the opposite way past
the grooves which hold it in place.
Improper removal of Gear may damage the mount and in rare cases can pull the mount off the
mounting material (i.e., drywall).
Figure 14 Gear Removal From Mount
To Next Page
Loading...