Why does the Axis Home Automation app not connect to Gear?
If your Axis Home Automation app isn't connecting to Gear, it might be due to an issue with indirect hub integrations. To resolve this, perform a Factory Reset.
What to do if the LiPo battery status shows Red on my Axis Gear Home Automation?
If the LiPo battery status shows red, it means the LiPo charge is under 25%. You should deep charge the Gear to resolve this issue.
What to do if motor status shows Red during Axis Home Automation testing?
If the motor status shows red during testing, it indicates a potential fault in the motor. Perform the test while the motor is not attached to a shade cord.
What to do if Axis Home Automation capacitive touch strip shows Red?
If the Capacitive Touch Strip shows Red, this indicates that it does not recognize certain presses. Try the test again. If the Red color persists, it may indicate a fault with the Touch Strip.
General| Brand | Axis |
|---|---|
| Model | Gear |
| Category | Home Automation |
| Language | English |
Describes SET, GROUP, PAIR buttons and the touch strip for shade control.
Introduces three mount configurations: Inside, Outside, and Middle (Mullion).
Covers positioning, attaching the chain/cord, installing the power module, and powering on.
Outlines main functions controllable via on-device buttons like power and shade adjustment.
Explains how to perform a BIST to test motor direction and general functionality.
Details how to perform a factory reset and its consequences on settings and firmware.
Describes pairing Gear with the AXIS app, including permissions and device scan.
Guides on identifying location, setting shade types, mount types, and calibrating positions.
Describes connecting to Gear and using the app's control screen for shade movement.
Guides on creating, setting days, times, positions, and saving schedules or templates.
Covers movement limits, time sync issues, and handling failed schedule transmissions.
Guides on creating, editing, deleting groups, and connecting to existing ones.
Provides methods for switching Gear between Bluetooth and Smart Home modes.
Guides on integrating Gear with Echo Plus, including pairing and voice control.
Covers adding the Control4 driver and joining Gear to the system.
Guides on prerequisites, developer account, and adding Gear to the app.
Addresses issues like Gear not powering on or working after firmware updates.
To Next Page