Control4 Integration
Before you begin, please make sure that:
- All Gears are in Smart Home Mode
- You have Composer Pro Software installed
ADD DRIVER TO SYSTEM
This driver is designed for AXIS Gear. The driver provides 2-way communication between the
Director and the Gear so that all events are updated real time. The functions of this driver
include the following:
- Open
- Close
- Set Blind to Discrete Level
- Stop
Group functionality can be implemented via the TEMP_LEVEL attribute which is described in
the Group Control section of the documentation.
1. In the menu bar, go to Driver > Add or Update Existing Driver to make the driver available
to Composer
2. Go to System Design
3. Under the Items section, go to My Drivers and right-click on the desired folder (or create a
new one) and click on Add Driver
4. Select Blinds as the Device Type and select AXIS Gear. It should now appear in My Drivers
5. Double click on the Driver to add it to the System (NOTE: Do this step for every Gear that
needs to be added)
JOIN GEAR TO SYSTEM
1. Go to Connections and go to the Network tab
2. Click on ZigBee Network to show the ZigBee device and available drivers
3. Enable joining of devices by using any of the following methods and select the appropriate
ZigBee server:
- Double Click on the Driver
- Right Click on the Driver and select Identify
- Select Driver and click Identify and press Next > until you reach the Driver
4. Long Press the Pair button on the Gear and wait until the EUI of the ZigBee device is
populated as the Address
GROUP CONTROL
To Next Page
Loading...