Removing A Mounting Bracket
Due to the construction and overall sturdiness of the mounting bracket, we consider Gear a
permanent solution and do not offer regular support with removal. It is for this reason why
installation is ideally done by a professional and that the install space is prepared and placed
appropriately.
If Gear was installed on drywall/plaster wall with the use of the double-sided tape, should
removal absolutely be required, it can be done so with force. However, this will most likely lead
to damage to the wall itself and/or the mounting bracket. Removal from glass or metal surfaces
will not incur damage to these surfaces should it be done with care.
If the bracket was installed using screws on a porous surface such as drywall, then you may
carefully remove these along with the bracket.
To Next Page
Loading...