Amazon Echo Plus
Important: Direct integration only works with Echo Plus and Echo Show. Other products in the
Amazon Echo line are not compatible with AXIS Gear.
Before you begin, please make sure that:
- Gear is configured and put into Smart Home Mode
- Echo Plus is set up and configured
- The Amazon Alexa App is set up on your mobile device
JOIN GEAR TO AMAZON ECHO PLUS
1. Open the Amazon Alexa app and navigate to Smart Home
2. Mark your Echo Plus 'discoverable':
a. Say "Alexa, discover devices," OR
b. Go to the Smart Home section and click on the + icon > Add Device
3. Immediately press Pair on your AXIS Gear. Echo Plus will discover AXIS Gear as ‘First
Device' (or Second, or Third).
The touch strip flashes green twice to indicate a successful pairing
To verify, go to All Devices in the Devices screen. The Gear will appear as 'First Device' (or
Second, or Third)]
VOICE COMMANDS
1. In the Devices screen click on the + icon in the top right corner
2. Select Add Group and choose a room name
3. Select the Gears that will be part of the group
4. Now you can use the following commands which Alexa can process:
"Set [room] to ___%" - all blinds go to desired percentage
NOTE: You may also control each device by using the name given to the device. For example,
"Set First Device to 50%"
SCHEDULES
1. Go to Routine > Add Routine
2. Select Schedule under When this happens and set a time, press Next
3. Select Smart Home, select Smart Home, select Control Device, select the device
4. Select Brightness and set a value anywhere between 0% and 100% (0% is close, 100% is
open)
To Next Page
Loading...