Axis M3216-LVE - Trigger an Action

AXISM32DomeCameraSeries
Configureyourdevice
Setuprulesforevents
Youcancreaterulestomakeyourdeviceperformanactionwhencertaineventsoccur.Aruleconsistsofconditionsandactions.
Theconditionscanbeusedtotriggertheactions.Forexample,thedevicecanstartarecordingorsendanemailwhenitdetects
motion,orshowanoverlaytextwhilethedeviceisrecording.
Tolearnmore,checkoutourguideGetstartedwithrulesforevents.
Triggeranaction
1.GotoSystem>Eventsandaddarule.Theruledeneswhenthedevicewillperformcertainactions.Youcanset
uprulesasscheduled,recurring,ormanuallytriggered.
2.EnteraName.
3.SelecttheConditionthatmustbemettotriggertheaction.Ifyouspecifymorethanoneconditionfortherule,allofthe
conditionsmustbemettotriggertheaction.
4.SelectwhichActionthedeviceshouldperformwhentheconditionsaremet.
Note
Ifyoumakechangestoanactiverule,therulemustbeturnedonagainforthechangestotakeeffect.
Note
Ifyouchangethedenitionofastreamprolethatisusedinarule,thenyouneedtorestartalltherulesthatusethat
streamprole.
Recordvideowhenthecameradetectsanobject
ThisexampleexplainshowtosetupthecameratostartrecordingtotheSDcardvesecondsbeforeitdetectsanobjectandto
stoponeminuteafter.
MakesurethatAXISObjectAnalyticsisrunning:
MakesurethatAXISVideoMotionDetectionisrunning:
1.GotoApps>AXISObjectAnalytics.
2.GotoApps>AXISVideoMotionDetection.
3.Starttheapplicationifitisnotalreadyrunning.
4.Makesureyouhavesetuptheapplicationaccordingtoyourneeds.
Createarule:
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,underApplication,selectObjectAnalytics.
4.Inthelistofconditions,underApplication,selectVMD4.
5.Inthelistofactions,underRecordings,selectRecordvideowhiletheruleisactive.
6.Inthelistofstorageoptions,selectSD_DISK.
7.Selectacameraandastreamprole.
8.Settheprebuffertimeto5seconds.
9.Setthepostbuffertimeto1minute.
13