Axis P1354-E - Reset to Factory Default Settings

AXISP13-ESeries
Note
•Theviewinfrontofthecamerashouldnotbechangedduringfocusadjustment(steps5
and6).Ifthecameraismoved,orifangerorotherobjectisplacedinfrontofthelens,
steps3–7belowwillhavetoberepeated.
•Ifmovementsinfrontofthecameracannotbeavoided,theFocusAssistantshouldnot
beused.
•Ifthecontrolbuttonisnotreleasedwithintwoseconds,AXISDynamicDNSService
isenabledinsteadoftheFocusAssistant.
•Ifthecameraismountedsothatthecontrolbuttoncannotbeaccessed,youcanstilluse
theFocusAssistant.Followtheinstructionsbutmountthecameraafterstep4(pressing
thecontrolbutton)insteadandskipstep7.
1.Mountorplacethecamerasothatitcannotbemoved.
2.Loosenthezoompullerbyturningitanti-clockwise.Movethepullertosetthezoom
level.Retightenthezoompuller.
3.Setthecameratoitsextremedistant-focuspositionbylooseningthefocuspullerand
turningthefocusringfullyclockwise.
4.Pressandquicklyreleasethecontrolbutton.Whenthestatusindicatorashesgreen,the
FocusAssistantisenabled.Ifthestatusindicatorasheseitherredoramberbeforeyou
areabletoadjustthelens,skiptostep7toexittheFocusAssistantandrepeatsteps3–7.
5.Gentlyturnthefocusringanti-clockwiseuntilitstops.
6.Finally,turnthefocusringslowlyclockwiseuntilthestatusindicatorashesgreen
oramber(notred).
7.ToexittheFocusAssistant,pressthecontrolbutton.TheFocusAssistantisswitchedoff
automaticallyafter15minutes.
8.Retightenthefocuspuller.
9.OpentheLiveViewpageinthewebbrowserandcheckthequalityoftheimage.
10.Continuewithsteps6–8onpage23.
ResettoFactoryDefaultSettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultwillreset
allsettings,includingtheIPaddress,tothefactorydefaultvalues.
Note
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpages
onwww.axis.com/techsup
Toresettheproducttothefactorydefaultsettings:
24