Axis P3818-PVE - Page 14

AXISP3818-PVENetworkCamera
Configureyourdevice
4.Typeanemailaddresstosendtheemailto.
5.Thecameradoesn’thaveit’sownemailserver,soitwillneedtologintoanotheremailservertobeabletosendmails.Fill
intherestoftheinformationaccordingtoyouremailprovider.
6.Tosendatestemail,clickTest.
7.ClickSave.
Createarule:
8.GotoSystem>Events>Rulesandaddarule.
9.Typeanamefortherule.
10.Inthelistofconditions,selectCasingopen.
11.Inthelistofactions,selectSendnoticationtoemail.
12.Selectarecipientfromthelist.
13.Typeasubjectandamessagefortheemail.
14.ClickSave.
Setuptheintrusionalarm
Beforeyoustart
•Connecttheintrusionalarmswitchtopin1(ground)andpin3(digitalI/O)ofthecamera’sI/Oconnector.
Conguretheinputport
1.GotoSystem>Accessories>I/Oports.
2.ForPort1:
2.1SelectInput.
2.2SelectCircuitclosed.
Addarecipient:
3.GotoSystem>Events>RecipientsandclickAddrecipient.
4.Typeanamefortherecipient.
5.SelectEmail.
6.Typeanemailaddresstosendtheemailto.
7.Thecameradoesn’thaveit’sownemailserver,soitwillneedtologintoanotheremailservertobeabletosendmails.Fill
intherestoftheinformationaccordingtoyouremailprovider.
8.Tosendatestemail,clickTest.
9.ClickSave.
Createarule
10.GotoSystem>Events>Rulesandaddarule.
11.Typeanamefortherule.
12.Inthelistofconditions,underI/O,selectDigitalinput.
14