About this document
This manual is intended for administ rators and users of the AXIS P5534
Network Camera, and is applicable to firmware 5.40 and later. It
includes instructions for using and managing the product on your
network. Previous experience of networking w ill be of use when
using this product. Some knowledge of UNIX or Linux-based systems
may also be beneficial, for developing shell scripts and applications.
Laterversionsofthisdocumentwill be posted to the Axis website,
as required. See also the product’ s online help, available via the
web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals w ithout prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, inclu ding, but not limited to, the implied
warranties of merchantability and fitness for a partic ular purpose. Axis
Communications AB shall not be liable nor responsib le for incidental or
consequential damages in connection with the furnishing, performance
or use of this mat eria l. Th is product is only to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied
in the product described in this document. In particular, and without
limitation, these intellectual property rights may include one or more
of the patents listed at http://www.axis .c o m/patent.htm and one or
more additional patents or pending pat ent applications in the US and
other countries.
This product contains licensed third-party software. See the menu item
“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source c ode is available
from http://develop er.apple.co m/darwin/p rojects/bonjour/
Equipment M odifications
This equipment must be ins ta lled and used in strict acco rdance with the
instructions given in the user docum entation. This equipment contains
no user-serviceable components. Unaut horized equipment changes or
modifications will inva lidate all applicable regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux, Microso
ft,
Mozilla, Real, SMPTE, QuickTime , UNIX, Windows, Windows Vista and
WWW are registered trademarks of the respe ctive holders. Java and
all Java-based trademarks and logos are trademarks or registe
red
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certification
mark of the UPnP
TM
Implementers Corporation.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries throu
gh the appropriate channels to
ensure a rapid response. I f you are connected to the I nternet, you can:
• download user documentation and software u pdates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report p roblems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (se lected countries only)
• visit Axis Support at www.axis.com/techsup/
Electromagnetic Compatibility (EMC)
This e quipment has been designe d and tested to fulfill applicable
standards for:
• Radio frequency emiss
ion whe n installed according to the
instructions an d used in its i nt ended environment.
• Immunity to electrical and electromagnetic phenomena when
installed accor
ding to the instructions and used in its intended
environment.
USA
Depending on the cha r acteristics of the electrical environment, using
shielded cables (STP) may be appropriate, in which case the following
is applicable: This equipment has been tested using shielded cables
(STP) and foun d to comply with the limits for a Class B digita l device,
pursuant to part 15 of the FCC Ru les . These limits are designed
to provide reasonable protection against harm ful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, wh ich
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect th e equipment into an ou tlet on a circu it different from
that to which th e receiver is connecte d.
• Consult the dealer or an experienced radio/TV technician for help
Canada
This Class B digital app ara tus complies with Canadia n ICES-003.
Europe
This digital equipment fulfills the requirements for RF emission
according to the Class B limit of EN 55022.
This product fulfill s the req uireme nts for imm u nity according to
EN 61000-6-1 residential, commercial and light-industry environments.
This product fulfill s the req uireme nts for imm u nity according to
EN 61000-6-2 industrial environments.
This product fulfill s the req uireme nts for imm u nity according to
EN 55024 office an d commercial environments.
Australia/New Zealand
This digital equipme nt fulfills the requiremen ts for RF emission
according to th e Class B limit of AS/NZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는것을목적으로하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
To Next Page
Loading...
Need help?
General
Weight and Dimensions
