Axis P5534 - Event Management; Action Rule Triggers and Conditions

AXIS P5534 PTZ Dome Network Camera
Events
Events
The Axis product can be configure d to perform actions when di fferent events occur, for example , start a recording when m o tion i s
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications, on page 30.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 29.
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 28.
• Hardware
- Fan — trigger the rule if the fan is malfunctioning. Thiscanforexamplebeusedtosendmaintenance
notifications.
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This
canforexamplebeusedtosendmaintenancenotifications.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal fro m a connected device, s ee I/O
Ports, on page 44.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View page, on page 9 . This can for exa mple be used to validate actions during product inst allation
and configuration.
• PTZ
- Moving — trigger the rule when the cam era v iew mov
es due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motio n detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images acti
on to upload images from the preset position.
• Storage
- Available
— trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the storage device is full . U nder normal opera tion, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked
—triggertheruleifthestoragedeviceislocked(writeprotected).
• System
- System Initializing — trigger the rule w he n the product is being started. This can for example b e used to send a
notification when the product restarts.
• Time
- Recurrence — t rigge r the rule periodicall y, see Recurrences, on page 34. This can for example be used to upload
an image every 5 minutes.
31