Axis Q7436 - Page 59

AXISQ7436VideoEncoderBlade
SystemOptions
Note
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonwww.axis.com/techsup
ForproductswithmultipleIPaddresseschannel1willhavetheaddress192.168.0.90,channel2willhavetheaddress
192.168.0.91andsoon.
Toresettheproducttothefactorydefaultsettings:
1.Pressandholdthecontrolbuttonandtherestartbuttonatthesametime.
2.Releasetherestartbuttonandholdthecontrolbutton.
3.KeepthecontrolbuttonpresseduntilthepowerLEDindicatorturnsgreenandthe6statusLEDindicatorsturnamber
(thismaytakeupto15seconds).
4.Releasethecontrolbutton.WhenthestatusLEDindicatorsdisplaygreen(whichcantakeupto1minute)theprocessis
completeandtheunithasbeenreset.
5.Theprocessisnowcomplete.Theproducthasbeenresettothefactorydefaultsettings.IfnoDHCPserverisavailableon
thenetwork,thedefaultIPaddressis192.168.0.90-95
6.Usingtheinstallationandmanagementsoftwaretools,assigntheIPaddresses,setthepasswordandaccessthevideo
stream.
Note
Toresetasinglechanneltotheoriginalfactorydefaultsettings,usethebuttonprovidedinthatproduct’swebpage.
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup>SystemOptions>Maintenanceand
clickDefault.
59