Axon TASER Axon Dock

Chapter 3: Axon Dock Installation 9
TASER Axon Dock Installation Manual
2 Plug the other end of this Ethernet cable into an active Internet port, which connects to your
agency network.
3 Plug the other Ethernet cable into the LAN port.
4 Plug the other end of this Ethernet cable to your computer.
CAUTION! INSTALLATION
DO NOT connect the LAN port to the wall.
Step 4: Connect to Power
1 Connect the two segments of the power cord included with the dock.
2 Plug the power cord into the core.