19
Chapter 5: Attaching the Desk Plate
Introduction
If you use your Axon Dock on a desk or table, you should attach your dock to a desk plate. The desk
plate holds the core and bay together and keeps the dock from sliding on at surfaces.
There are two desk plates. One is designed for use with a core and a single bay; the other is for use
with a core and a 6-bay. The pictures in this procedure show the plate designed for use with a 6-bay.
Tools and Materials
Tools Materials
Screwdriver Screws
Desk plate
Rubber feet
Step 1: Preparation
1 Ensure you have all the tools necessary to perform this procedure.
2 Read all of the manufacturer’s installation instructions for the dock. Fol-
low the instructions for putting the dock together in Chapter 3: Axon
Dock Installation.
3 Place the plate on a table with the at surface facing up.
To Next Page
Loading...
