6
Chapter 3: Axon Dock Installation
Introduction
Installing your Axon Dock consists of several steps, to be followed in order.
Step 1: Accept the Evidence.com Administrator Invitation
• Ensure that you know your user name, password, and agency domain name.
This email invitation will come from noreply@evidence.com.
• If you do not accept the invitation, you will not be able to complete Axon Dock setup.
Step 2: Assemble the Dock
1 Take the dock out of the box and conrm that all pieces are present.
2 Connect your core to all bays you plan to use.
Notes:
• Do not attach more than 5 individual bays or one 6-bay to 1 core.
• You should hear a click when pushing the core, bays, and bridge adapters together. If the
Axon Dock assembly does not stay together, press the components together with more
force. The parts need to t ush together.
CAUTION! DATA AND POWER LOSS
Do not attach more than 5 individual bays to a core. The system will not provide power to
more than 5 individual bays. Axon cameras in any extra bays will not upload any data to Evi-
dence.com and Axon devices in any extra bays will not be recharged.
3 Turn the dock assembly over so the bottom is facing up.
To Next Page
Loading...
Need help?
General
