AX SWC
Dual Assignment (long button press)
REV. 2/17/20© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
The AXSWC interface has the capability to assign (2) functions to a single button except for Volume Up and Volume Down, after the interface has been programmed and is fully functional.
This feature can be performed by either following the steps below, through a Windows based computer using the Axxess Updater, or through the Axxess Updater app available from the
Android/Apple mobile devices app store
.
Notes:
a) Seek Up and Seek Down come pre-programmed as Preset Up and Preset Down for a long button press.
b) Apple mobile devices will require the use of the AXHUB-1 for this feature.
Attention! If more than 10 seconds elapses between steps, the procedure will abort, and the light in the interface will go out. The interface may not function properly and may need to
be reset and reprogrammed
.
1. Program the interface to the vehicle following the vehicle specific document.
2. Turn the radio off.
3. Cycle the key off, then back on.
4. Wait until the light flashes Green 1 time then goes out.
5. Press and hold the desired SWC button for dual assignment for 10 seconds (or until the light flashes rapidly Green), then release. The light will turn solid Green indicating the
interface is in Dual Assignment mode.
6. Reference the Dual Assignment Legend. Press and release the Volume Up button on the steering wheel the number of times related to the desired feature for a long button press.
7. Press and release the SWC button from step 5. The light will go out indicating the information has been stored to memory.
8. Repeat from step 5 to select another SWC button for dual assignment.
9. To reset an SWC button back to its default state, repeat steps 3 and 4, then press and release the Volume Down button on the steering wheel. The light will go out, and the dual
assignment feature for that button will be erased.
Dual Assignment Legend
Function # Function
1 Volume Up *
2 Volume Down *
3 Seek Up / Next
4 Seek Down / Previous
5 Mode / Source
6 ATT / Mute
7 Preset Up
8 Preset Down
9 Power
Function # Function
10 Band
11 Play / Enter
12 PTT
13 On Hook
14 Off Hook
15 Fan Up *
16 Fan Down *
17 Temp Up *
18 Temp Down *
* Not applicable in this application
To Next Page
Loading...
