Azdome M301 - Getting Started

EN-09 EN-10
6. Getting Started
The camera is designed to power up and record automatically
when it receives power. Then saves the video record and turns off
automatically when the car shuts off.
1. Auto Power ON/OFF:
Plug car charger to cigarette lighter socket. When the car engine is
on, dash cam will turn ON and start recording automatically.
When the car key is turned to LOCK position, dash cam
automatically saves the recording and turns OFF.
2. Manual Power ON/OFF
Manually Turn ON: Press the power button once.
Manually Turn OFF: Press and hold the power button for at least 2
seconds.
1. A 64GB microSD card is provided with the AZDOME dashcam
when you purchase the product. Be sure to format your microSD
card with your dash cam for the first time use.
2. The dash cam will automatically update its time when it is
connected to the AZDOME APP on a phone via WiFi.
3. Some trucks/cars’s 12V cigarette outlet is always HOT, which
means it provides constant power even when the car is turned
off and locked. If this is the case for your vehicle, then the auto
ON/OFF feature will not work. And if you leave the camera
continuously recording when the car is turned off, then it will
drain your car/truck’s battery and you might not have enough
Note:
power to start your car for next time. To remedy this situation,
you can do one of the two options:
①Hardwire your dash cam to your car’s fuse box with 3-Lead Auto
Trigger Hardwire Kit.
②Change the connection in the fuse box for your 12V outlet to
socket which only supplies power when car key is turned to ACC
or ON position.