Selecting Destinations
Selecting a Point of Interest (POI) destination
28 SmartMirror User’s Guide 2008
AZENTEK, LLC Revision 2.0
POI direct access
In the MAIN WINDOW:
1. Tap the New Destination button.
The N
EW DESTINATION MENU opens.
The symbols of the categories which have been selected for direct access can be
seen in the menu at the bottom.
2. Tap on a category from which you would like to select a POI.
The
Name of the Destination list opens. It contains the nearest POIs in the speci-
fied category, sorted by distance.
3. Tap on the name of the destination.
Note: GPS reception must be sufficient for determining position. You can determine
whether GPS reception is sufficient by looking at the (GPS Ready) symbol. For more
information, see “GPS ” on page 12.
To Next Page
Loading...
