4ª 10103 (GB) 6 - 2008
76
Function 481
<<COMUNICAT>> Select the communication system.
0
This allows you to select the communication system to be used. The four
options are:
Open door: Programming YES implies that the door must be open for
the machine to communicate. Programming NO means it
will communicate with the door open or closed.
Protocol:
VTM
BDTA
EVADTS DDCMP
EVADTS EOP
Chang-Accunt: programming YES will extract the accounting data for
each one of the product channels.
IRPWD reset: programme YES to delete the operator code. Programme
NO to leave the operator code that was programmed.
2”
C
FUNCTION = 000
A
B
C
FUNCTION = 481
R
OPEN DOOR? NO
A
B
OPEN DOOR? YES
R
To Next Page
Loading...
