User Manual
Page 18 of 68
DHCP
If you select DHCP, the wireless router will automatically acquire the IP address,
subnet mask, gateway and so on. You do not need to manually set the network
parameters above.
DHCP+
If you select DHCP+, you are required to enter the username and password
provided by your ISP, the wireless router will automatically acquire the IP address,
subnet mask, gateway and so on. You do not need to manually set these network
parameters.
PPPoE/PPPoE+/Dynamic PPPoE
If you select PPPoE, PPPoE+ or Dynamic PPPoE, please enter the username and
the password provided by the ISP.
To Next Page
Loading...
