User Manual
Page 62 of 68
System
Management
This page is used to change the login username and password, and set the remote
management.
New Username: Set the new login username.
New Password: Set the new login password.
Confirm New Password: Enter the new password again.
Enable Remote Management: Enable or disable the remote management function.
Allowed IP Address: Set the IP address of the host that is allowed to perform the
Web management of the wireless router remotely.
Port: Set the login port for performing the Web management remotely.
After finishing setting, click the Apply button to make the settings take effect.
To Next Page
Loading...
Need help?
General
