User Manual
Page 22 of 68
10. Click Connect to start to connect to the Internet.
WPS (Wi-Fi Protected Setup)
WPS button allows you to activate Wi-Fi Protected Setup (WPS). When you press
the WPS button, the wireless router automatically detects and connects the
wireless clients in the wireless network by broadcasting its wireless network
settings to the wireless devices.
To set WPS, do as follows:
1. Press the WPS button on the rear panel of the wireless router.
2. Within 2 minutes, press the WPS button on the wireless clients.
Note: WPS can only be used with the wireless client devices that have a
compatible WPS component.
To Next Page
Loading...
Need help?
General
