User Manual
Page 41 of 68
PPPoE/PPPoE+/Dynamic PPPoE
Disable NAT: Enable or disable the NAT function.
Internet Connection: Select the PPPoE, PPPoE+, or Dynamic PPPoE.
Username: Enter the username provided by the ISP.
Password: Enter the password provided by the ISP.
Confirm Password: Enter the password provided by the ISP again.
PPPoE Server name: Enter the domain name provided by the ISP.
IP Address: When selecting the Dynamic IP, the wireless router will automatically
acquire an IP address. When selecting the Static IP, you need to manually enter
the IP address provided by the ISP.
To Next Page
Loading...
Need help?
General
