User Manual
Page 11 of 44
Setting up the Device
In setting up your device kindly follow the instructions provided for the desired
setup of your WL559E. It is important to know what the intended usage of your
WL559E is, before doing the setup. You may also refer to the provided setup
diagrams to setup your device easily.
Wireless Repeater
a. Plug your WL559E to a power outlet.
b. Connect your WL559E to the computer using an Ethernet cable
through their respective Ethernet ports.
c. Launch a web browser and you will automatically be redirected to the
Web User Interface of your WL559E. If in any case it does not open,
kindly type 10.0.10.254 on the address bar and hit enter.
d. Select your SSID (wireless network/wifi name) from the list and click the
Connect button .
To Next Page
Loading...
